VERYeSAFE LTD

07572675781

  • HOME
  • TECHNOLOGY
  • SCHOOLS
  • AVIATION
  • TESTIMONIALS
  • NEWS
  • FAQ
  • CONTACT
  • Mais
    • HOME
    • TECHNOLOGY
    • SCHOOLS
    • AVIATION
    • TESTIMONIALS
    • NEWS
    • FAQ
    • CONTACT

07572675781

VERYeSAFE LTD
  • HOME
  • TECHNOLOGY
  • SCHOOLS
  • AVIATION
  • TESTIMONIALS
  • NEWS
  • FAQ
  • CONTACT

Nanotechnology

Antimicrobial Nanotechnology

Our coating technology is based on the use of Quaternary ammonium silicone compounds (“SiQAC”) as antimicrobial agents, either in solvent or in aqueous and stable solutions.  

When the ammonium salts react with certain organosilanes, they form an integrated system. Once this system is applied to any surface, it forms an invisible (one molecule deep) and durable (due to ion exchange and rapid polymerisation) antimicrobial protection.  

Water-Based

 Making these compounds using a water-based system provides a host of benefits:


  • They are non-flammable and require no solvents for dilution.
  • They require no special handling,
  • They are able to disperse uniformly on almost any surface.
  • They are simple and economical to use because of their extended shelf-life.

Environment Friendly

Because this new generation Antimicrobial coating is water-based, it contains none of the agents harmful to the environment, such as VOC, Heavy metals, Formaldehyde Treatment, Phenol Groups, or odour causing agents that can lead to allergies or asthma.

A REVOLUTIONARY WATER-BASED ANTIMICROBIAL COATING.

Our product can be applied to almost any surface, which enables an entirely new level of protection in your facility. 

The ingredients have been tested and found to be effective against a wide range of viruses and bacteria, creating an inhospitable surface for these dangerous microorganisms, and keeping your facility safer for everyone.


Our formula is a next generation water-based, long-term antimicrobial coating designed to inhibit the growth of microorganisms for a recommended period up to 90 days after application. 


Once the coating has dried, it forms an invisible layer of “nanospikes” that penetrate and destroy cell membranes. Due to these “nanospikes”, our product’s process of elimination is mechanical instead of chemical in comparison with other long-term solutions such as silver ion and copper.

This is extremely effective in both high and low traffic areas. 


The coating can be applied to and bonds with almost any surface – porous or non-porous, metal, leather, fabric etc. 


The active ingredient in the coating is 

ECHA (European Chemicals Agency) registered and compliant.

Scientific Testing of our Antimicrobial coating

British Standards ISO 21702

British Standards BS/EN 13697

British Standards ISO 21702

 ISO 21702:2019 

 Antiviral activity of Human Coronavirus (CoV-229E) long-term contamination on plastics and other non-porous surfaces.


30 Day Human Coronavirus test - 99% efficacy 

60 Day Human Coronavirus test - 94% efficacy 

90 Day Human Coronavirus test - 89% efficacy 

British Standards BS/EN 1276

British Standards BS/EN 13697

British Standards ISO 21702

BS EN 1276:2019


  Quantitative suspension test for the evaluation of bactericidal activity (Enterococcus hirae, Pseudomonas aeruginosa, Staphylococcus aureus, Escherichia Coli) of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. 


99,995% efficacy (log reduction)

British Standards BS/EN 13697

British Standards BS/EN 13697

British Standards BS/EN 13697

 

 BS EN 13697


Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. 


 99,995% efficacy (>5 log reduction) 

British Standards BS/EN 14476

British Standards BS/EN 14561

British Standards BS/EN 13697

 BS EN 14476 (Phase 2 - Step 1) :  


Quantitative suspension test for evaluation of virucidal activity in the medical area. 


99,98% efficacy (log reduction)

British Standards BS/EN 14561

British Standards BS/EN 14561

British Standards BS/EN 14561

  BS EN 14561 (Phase 2 - Step 2) :


Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area. 


 99,9% efficacy (log reduction) 



In-vitrio Skin irritation tests

British Standards BS/EN 14561

British Standards BS/EN 14561

 Reconstructed human epidermis test method.


According to criteria outlined in OECD 439 our antimicrobial coating is classified as non-irritant.

All scientific tests and studies using our Antimicrobial coating have been done at an independent UK certified  laboratory.

CLICK TO Request Scientific STUDIES

OUR ACTIVE INGREDIENT HAS BEEN USED AND TESTED FOR OVER 20 YEARS

 OUR ACTIVE INGREDIENT IS REGISTERED WITH ECHA (EUROPEAN CHEMICAL AGENCY) FOR USE ON ALMOST ALL SURFACES FROM POROUS ABSORBENT MATERIALS TO HARD NON-POROUS SURFACES.

TECHNICAL BENEFITS

CONTINUAL SANITISATION

 The coating doesn’t just terminate existing germs on a tested surface, it actively protects against their existence for up to a period of 90 days at a time. 

Prevents microbe resistance

 Bacteria can become resistant to chemical cleaning products but, our Antimicrobial coating “nanospike “ technology inhibits germs from living and growing on a surface, reducing the chance for them to adapt and mutate.  

Optimal Efficacy

Protects against a vast range of viruses and bacteria. Our coating is water-based and effective. 

Easy to apply

 Our products are designed with our customers in mind. While we always recommend a professional installation, our Antimicrobial coating can, after adequate training, also be applied via a spray bottle or fogging system.

Surface adaptability

The active ingredient in our Antimicrobial coating is tested and proven effective, in various environments, on a number of porous and non-porous surfaces. The bond formed provides durable surface protection that withstands even routine cleaning under normal office conditions and only removed by abrasion.  

OUR ANTIMICROBIAL COATING IS NOT REMOVED BY REGULAR CLEANING AND DISINFECTING !

Drop us a line!

Este site está protegido por um reCAPTCHA. Além disso, aplicam-se a Política de privacidade e as Condições de serviço da Google.

VERYSAFE UK

PE9 2HU, Stamford, Lincolnshire, England, United Kingdom

07572675781 office@verysafeuk.com



Antimicrobial coating - Tested in compliance to  British Standards:

BS EN 14476 | BS ISO 21702 | BS EN 1276 

ECHA (EUROPEAN CHEMICALS AGENCY)REGISTERED AND FULLY COMPLIANT

REGISTERED FSB MEMBER 

  

Verysafe UK Ltd is a private limited company with number 12614743 and incorporated in England & Wales as private limited by shares, having its registered office situated in 3e St Leonard’s St, Stamford PE9 2HU, Lincolnshire, UK.


  • HOME
  • TECHNOLOGY
  • SCHOOLS
  • AVIATION
  • TESTIMONIALS
  • NEWS
  • FAQ
  • CONTACT

Copyright © 2023 VERYSAFE UK - All Rights Reserved

This website uses cookies.

We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.

Accept